Volume IIIA Basic Techniques Handbook of Crystal Growth, 2nd Edition Volume IIIA (Basic Techniques), edited by chemical and biological engineering expert Thomas F. Kuech, presents the underpinning science and technology associated with epitaxial growth as well as highlighting many of the chief and burgeoning areas for epitaxial growth. Volume IIIA focuses on major growth techniques which are used both in the scientific investigation of crystal growth processes and commercial development of advanced epitaxial structures. Techniques based on vacuum deposition, vapor phase epitaxy, and liquid and solid phase epitaxy are presented along with new techniques for the development of three-dimensional nano-and micro-structures. Volume IIIB Materials, Processes, and Technology Handbook of Crystal Growth, 2nd Edition Volume IIIB (Materials, Processes, and Technology), edited by chemical and biological engineering expert Thomas F. Kuech, describes both specific techniques for epitaxial growth as well as an array of materials-specific growth processes. The volume begins by presenting variations on epitaxial growth process where the kinetic processes are used to develop new types of materials at low temperatures. Optical and physical characterizations of epitaxial films are discussed for both in situ and exit to characterization of epitaxial materials. The remainder of the volume presents both the epitaxial growth processes associated with key technology materials as well as unique structures such as monolayer and two dimensional materials. Volume IIIA Basic Techniques Provides an introduction to the chief epitaxial growth processes and the underpinning scientific concepts used to understand and develop new processes. Presents new techniques and technologies for the development of three-dimensional structures such as quantum dots, nano-wires, rods and patterned growth Introduces and utilizes basic concepts of thermodynamics, transport, and a wide cross-section of kinetic processes which form the atomic level text of growth process Volume IIIB Materials, Processes, and Technology Describes atomic level epitaxial deposition and other low temperature growth techniques Presents both the development of thermal and lattice mismatched streams as the techniques used to characterize the structural properties of these materials Presents in-depth discussion of the epitaxial growth techniques associated with silicone silicone-based materials, compound semiconductors, semiconducting nitrides, and refractory materials
Handbook of Crystal Growth
Vol 2A: Basic Technologies Handbook of Crystal Growth, 2nd Edition Volume IIA (Basic Technologies) presents basic growth technologies and modern crystal cutting methods.
The objective of the Springer Handbook of Crystal Growth is to present state-of-the-art knowledge of both bulk and thin-film crystal growth.
Handbook of Crystal Growth: Fundamentals. Thermodynamics and kinetics
This book deals with almost all the modern crystal growth techniques that have been adopted, including appropriate case studies. Since there has been no other book published to cover the subject after the Handbook of Crystal Growth, Eds.
W.D. Kingery, H.K. Bowen, D.R. Uhlmann, Introduction to Ceramics, John Wiley & Sons, New York, NY, 1976. R.A. Ring, Fundamentals of Ceramic Powder Processing and Synthesis, Academic Press, San Diego, CA, 1996. M. Ohring, The Materials ...
The first section of this introductory book takes readers through the historical development and motivation of the field of crystal growth.
Volume 2 is divided into 2 parts. Part A reviews the principal techniques used for bulk single crystal growth from melt, solution and vapour and for industrial mass crystallisation starting, in chapter 1, with nature's techniques.
Liu, X.Y., Boek, E.S., Briels, W.J., and Bennema, P. (1995). Nature 374, 342–345. ... Maruyama, S., and Ooshima, H. (2000), J. Cryst. ... Nakada, T., Sazaki, G., Miyashita, S., Durbin, S.D., and Komatsu, H. (1999). J. Cryst.
This handbook seeks to facilitate the selection, design and operation of large-scale industrial crystallizers that process crystals with the proper size distribution, shape and purity sought.