[42] Pini, G., Electrochimica Acta, Vol. 22, 1977, pp. ... [46] Cahoon, J. R. and Hill, L. T)., Journal of Biomedical Materials Research, Vol. 12, 1978, pp. ... [49] Ross, T. K., Carter, D. A., and Smith, D. C, Corrosion Science, Vol.
[29] Larsen MH, Walmsley JC, Lunder O, Mathiesen RH, Nisancioglu K. Journal of the Electrochemical Society 2008;155(11):C550e6. [30] Svenningsen G, Larsen MH, Lein JE, Nordlen JH, Nisancioglu K. Intergranular corrosion of extruded ...
Other Failure Mechanisms Stress Corrosion Cracking The mechanistic differences between sulfide stress cracking and stress corrosion cracking (anodic type) are significant and influence the test methods used. Stated simply, the critical ...
[6] Pourbaix, M, Lectures on Electrochemical Corrosion, Plenum Press, London 1973. ... [13] Parkins, R.N., "The Use of Synthetic Environments for Corrosion Testing," ASTM STP 970, P.E. Francis, T. S. Lee, eds, American Society for ...
... Unidad Saltillo, especially to Dr. Cecilia Montero Ocampo for performing the SEM and ED AX analysis. ... Corrosion in Concrete Compared to Its Response in Pore Solution," The Use of Synthetic Environments for Corrosion Testing, ...
Corros Sci 1985;25:633. Parkins RN, STP-970. In: Francis PE, Lee TS, editors. Synthetic solutions and environment sensitive fracture, in the use of synthetic environments for corrosion testing. West Conshohocken, PA: ASTM; 1988. p. 132.
Significantly extended from the first edition, this book presents the basics of microbiologically influenced corrosion (MIC) in an accessible and concise manner.
Wire rope in offshore applications, Marine Technology Directorate Report no. MTD 88/100. MTD, London, 1988 Breen AJ. Low alloy steels in refinery service – 1: materials selection. Metal Construction 1984; 16 (11): 671–677 Glendinning IS ...
[21] Francis, P. E. and Lee, T. S., The Use of Synthetic Environments for Corrosion Testing, ASTM STP 970, American Society for Testing and Materials, Philadelphia, March 1988. [22] Papers by; Mercer; Schulmeister, R. and Speckhardt, ...
Synthetic versus natural environments for corrosion testing . In The Use of Synthetic Environments for Corrosion Testing , ed . P. Francis & T. Lee , STP 970 , pp . 205-16 . American Society for Testing and Materials , Philadelphia .
Fundamentals and Applications T Liengen, R Basseguy, D Feron, I Beech, V Birrien ... of aluminum alloys in seawater', in Francis, P. E. and Lee, T. S., The Use of Synthetic Environments for Corrosion Testing, Philadelphia, PA, ASTM, pp.