Mechanics is the body of knowledge that deals with the relationships between forces and the motion of points through space, including the material space.
The motivation of this dissertation is to investigate the cohesive crack model with the goal of devising feasible and practical fracture test methodologies for quasi-brittle materials, including ice, concrete and...
The 50-kW design has been used to good effect in a lengthy series of high temperature, low-cycle fatigue tests conducted ... Superalloy," Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials: Second Volume, ...
Knudsen, T., Inkenbrandt, P., Lund, W., and Lowe, M., 2012, Investigation of land subsidence and earth fissures in Cedar Valley, Iron County, Utah, for the Central Iron County Water Conservancy District: Utah Geological Survey ...
Proceedings of the 5th International (FIG) Symposium on Deformation Measurements, And, 5th Canadian Symposium on Mining Surveying and Rock Deformation...
Deformation Theory of Plasticity
These proceedings of EXPLOMET 90, the International Conference on the Materials Effects of Shock-Wave and High-Strain-Rate Phenomena, held August 1990, in La Jolla, California, represent a global and up-to-date appraisal of this field.
( 1997 ) also showed that Gmax values of stiff natural clays from advanced laboratory stress - strain tests using high quality undisturbed samples could be essentially the same with those from field shear wave velocities .
000 PO - 200 kPa Figure 2 , Pressuremeter in soil with stiffness varying with radius 0 ܝܣܢܬ 10-10-5 that to do 10- ? 10- 10 ° 10 sheor strain ( % ) Figure 1 , Typical variation of shear modulus with strain ( data for Todi Clay ...
... avec le vent - P. Hémon 144 pages ISBN 2-7302-1332-5 Analyse des solides déformables par la méthode des éléments finis - M. ... A. Rougé ( Nouvelle édition 2005 ) 448 pages - ISBN 2-7302-1231-0 Physique statistique et illustrations ...