Analysis and Design of Machine Elements
- ISBN-10
- 9380026471
- ISBN-13
- 9789380026473
- Category
- Machine design
- Pages
- 909
- Language
- English
- Published
- 2010-02
- Publisher
- I. K. International Pvt Ltd
- Authors
- Vijay Kumar Jadon, Suresh Verma
Description
The book covers fundamental concepts, description, terminology, force analysis and methods of analysis and design. The emphasis in treating the machine elements is on methods and procedures that give the student competence in applying these to mechanical components in general. The book offers the students to learn to use the best available scientific understanding together with empirical information, good judgement, and often a degree of ingenuity, in order to produce the best product. Few unique articles e.g., chain failure modes, lubrication of chain drive, timing belt pulleys, rope lay selection, wire rope manufacturing methods, effect of sheave size etc., are included. Friction materials are discussed in detail for both wet and dry running with the relevant charts used in industry. Design of journal bearing is dealt exhaustively. Salient Features: " Compatible with the Machine Design Data Book (same author and publisher). " Thorough treatment of the requisite engineering mechanics topics. " Balance between analysis and design. " Emphasis on the materials, properties and analysis of the machine element. " Material, factor of safety and manufacturing method are given for each machine element. " Design steps are given for all important machine elements. " The example design problems and solution techniques are spelled out in detail. " Objective type, short answer and review problems are given at the end of each chapter. " All the illustrations are done with the help of suitable diagrams. " As per Indian Standards.
Get the book
Other editions
Similar books
-
Design of Machine Elements
By Merhyle Franklin Spotts, Terry E. Shoup, Lee Emrey HornbergerThe radius of gyration is I d2 2.6252 ; A 16 16 = 0.431 in.2 The Euler load is Pe 72 EI 12 = 72 E2.331 362 532,500 lb In Eq . ( 32 ) , p2 1532,500 12,500 ) 0.0625 X 1.3125 50,000 X 5.412 + 1 + 0.431 50,000 X 5.412 X 532,500 + = 0 42 P2 ...
-
机械零件设计
By Terry E. Shoup, Lee Emrey Hornberger时代教育·国外高校优秀教材精选
-
Pro/Engineer Wildfire 3.0 zhong wen ban fan li jiao cheng
By 秦长海编著者还有:夏素民、白乔、杨方飞等
-
Pro/ENGINEER Wildfire 4.0 中文版机械设计案例教程
本书通过案例, 介绍了使用最新版本的Pro/E 4.0中文版进行机械设计的方法和技巧.全书共分7篇39章, 内容包括三维造型设计基础, 常用的造型创建方法, 常用模块的建模方法等.
-
大学生机械设计竞赛指导
By 明岩·赵本书主要介绍了大学生在参加机械设计竞赛中常用的设计, 加工方法, 着重讲了原理方案的构思, 包括抓取方案, 行走方案, 搬运方案, 越障方案, 提升方案, 攀爬方案以及创新设计等.
-
机械工程设计
By 希格利, 米施克, R. G.·布迪纳斯世界优秀教材中国版
-
構造材料的最適設計
By 賴耿陽構造材料的最適設計
-
机械结构动态设计理论方法及应用
By 陈新机械结构动态设计理论方法及应用
-
Machine Design, International Edition
By Robert L. NortonThe book points out the commonality of the analytical approaches needed to design a wide variety of elements and emphasizes the use of computer-aided engineering as an approach to the design and analysis of these classes of problems.
-
Teilautomatische Generierung von Simulationsmodellen für den entwicklungsbegleitenden Steuerungstest
By Alexander LindworskyBRONSTEIN ET AL. 2008 Bronstein, I.; Semendjajew, K.; Musiol, G.; Muehlig, H.: Taschenbuch der Mathematik. Frankfurt am Main: Harri Deutsch 2008. BROY ET AL. 1999 Broy, M.; Huber, F.; Schätz, B.: AutoFOCUS – Ein Werkzeugprototyp zur ...